In the use of diesel generator sets, generator manufacturers always emphasize with the user must be used to meet the specifications of clean diesel fuel, if the choice of impurities containing poor quality fuel, the unit will be running a lot of black smoke, we know that a good combustion of diesel generators, exhaust smoke should be colorless or light gray, some users will wonder, diesel generators with clean fuel is clearly in line with the specifications, why the smoke is still black. Why is the exhaust smoke still black?
In the use of diesel generator sets, generator manufacturers always emphasize with the user must be used to meet the specifications of clean diesel fuel, if the choice of impurities containing poor quality fuel, the unit will run a lot of black smoke, we know that a good combustion of diesel generators, exhaust smoke should be colorless or light gray, some users will wonder, diesel generators with clean fuel is clearly in line with the specifications, why the smoke is still black? Why does the exhaust smoke still appear black? In fact, in addition to the exhaust smoke and the cleanliness of the fuel, the main reason is the cylinder of air less, more fuel, fuel combustion is incomplete or not timely combustion caused by the following specific reasons.
1. diesel generator load is too large, low speed, more oil in the combustion system less air, resulting in incomplete combustion of fuel.
2. excessive valve clearance, or incorrect timing gear installation, resulting in insufficient air intake and exhaust or late fuel injection.
3. low cylinder pressure, resulting in low temperature after compression and poor combustion.
4. clogged air filter.
5. individual cylinders do not work or work poorly.
6. low temperature of the diesel generator, making poor combustion.
7. premature oil injection time.
8. uneven oil supply to each cylinder of the diesel generator or air in the oil circuit.
9. poor atomization of fuel injection nozzle or oil dripping.
As we all know, diesel generator fuel combustion is not sufficient will emit a lot of harmful substances, but also on the reliability of the unit will cause a certain impact, so the user should find out the reasons for insufficient fuel combustion and timely troubleshooting. Inspection can be used to break the method of cylinder by cylinder, first distinguish between individual cylinder work or all the cylinders are working poorly, such as when stopping the work of a cylinder, black smoke phenomenon disappeared, is the individual cylinder work poorly caused by black smoke, can be from the individual cylinder work poorly to find the cause, these reasons are mainly the following aspects.
1. bad injection nozzle work. Injector injection pressure is too low, injector dripping oil, spray quality is not good and oil dripping too strong, etc. will make the diesel fuel combustion is not complete, therefore, in the diesel engine found to have intermittent knocking sound, exhaust sound is not uniform, that is, the oil injection problems, should immediately check and adjust the injector.
2. the injection pump adjusting gear rod or adjusting tie rod travel is too large, so that the amount of oil supply is too much.
3. valve clearance does not meet the requirements, resulting in insufficient air intake.
4. The end face of the injection pump plunger sleeve and the contact surface of the oil valve seat is not sealed, or the injection pump adjusting gear ring locking screw or plunger adjusting arm is loose, etc., causing the oil supply to be out of adjustment, resulting in intermittent black smoke emission.
If the black smoke phenomenon can not be eliminated after stopping all the cylinders respectively, we should find the reason from the total aspects.
1. The diesel generator set is overloaded. Diesel generator overload operation, fuel supply, fuel can not be completely burned, its exhaust will be black smoke, so if you find the exhaust pipe with black smoke, diesel generator speed can not improve, exhaust sound is particularly large, that is, the diesel generator in overload work, generally as long as the load can be reduced to solve.
2. Oil supply time is too early. In the cylinder pressure, temperature is low, oil supply time is too early diesel engine will lead to part of the diesel fuel combustion is incomplete, the formation of charcoal particles, from the exhaust pipe spray, the color is gray-black, such a situation users should readjust the oil supply time.
3. air filter blockage, not enough in the diesel generator set will also smoke, if the diesel engine high speed, low speed are black smoke, you can take off the air filter test, if the black smoke immediately disappear, the air filter blockage, must be cleaned immediately.
In the case of using standard clean diesel fuel, diesel generator sets are still black smoke causes and exclusion methods as described above, of course, if you if the quality of diesel fuel does not meet the requirements, will also directly affect the fuel materialization, and then affect the quality of combustion, resulting in the inevitable phenomenon of black smoke, diesel generator sets incomplete combustion, will produce incomplete combustion products, such as carbon monoxide, dioxins, such as Polycyclic aromatic hydrocarbons, these incomplete combustion products on the environment, the human body are very harmful, so the user must avoid, once found that the combustion is not sufficient to cause the diesel generator set black smoke should be dealt with immediately.
Diesel generators use clean fuel that meets specifications, but why does the exhaust smoke appear black?
- News
QUESTIONS?
CONTACT US TODAY.
Most Popular Products
-
Cummins Engine Parts
6.7 cummins cold air intake Charge Pipe
-
Cummins Engine Parts
Cummins NT855 air filter housing assembly 4910285 K19 KTA19
-
Cummins Engine Parts
Truck Diesel Engine Parts QSL ISLe L375 Engine Piston 5267632 for Cummins